Workpiece Diameter
Wire, bar or profile with equivalent cross-section: from 1 mm up to 8 mm.
CAPACITY AND LENGTH TOLERANCE
WIRE CUTTING: Equipped with sensor-positioned hydraulic feeder compatible with bar magazine
| Speed (Capacity): | ≥ 400 blanks per minute at < 25 mm (length)
≥ 300 blanks per minute at <50 mm (length) |
| Length Tolerance | ≤ ±0.05 mm at blank length of 75 mm |
BAR CUTTING: Equipped with sensor-positioned hydraulic feeder compatible with bar magazine
| Speed (Capacity): | ≥ 200 blanks per minute at < 25 mm (length) ≥ 175 blanks per minute at < 50 mm (length) |
| Length Tolerance | ≤ ±0.05 mm at blank length of 50 mm |
STROKE AND FEEDER
| Single Feed : | Maximum 230 mm |
| Length Adjustment: | From operator panel |
TOOLS
| Cut-off tools: | 1 pair of dies per cross-section and profile |
| Grippers: | 1 set (2 pair of grippers) |
| Inlet Guide: | 1 set per cross-section and profile |
| Brakes: (bar feed only) | 1 set per cross-section and profile |
| Time for tool change : | 2 – 10 minutes |
OPERATOR PANEL (SIEMENS)
Panel with push-buttons for:
|
Panel with push-buttons for:
|
DIMENSIONS
| Cutting unit: | Width: 1 200 mm Length: 2 100 mm Height: 1 630 mm |
| Centerline, cutoff: | Height: 1 000 mm |
WEIGHT
| Hydropulsor HYP30-15 | Approx. 1 950 kg |
MAINS
| Voltage: | 3x400V, 50Hz |
| Power requirements total: | 38 kW max |
| Air-pressure: | 0.1 m3/min at pressure 6 bar |
HYDRAULICS
| Water cooler: | 30 l/min at pressure 3-4 bar |
| Pressure: | 160 bar |
| Power: | 33 kW max (intermittent duty) |
| Flow rates: | 105 l/min |
| Tank: | Approx 250 l |
OPTIONS
Integration of customer-delivered options by agreement. |
OTHER
| Anti-vibrators: | Part of delivery (standard?) |
| Colour, standard: | Green and black (or customer order) |
* Specifications subject to change without notice.
