HYP30-15

Speed (Capacity): 

≥ 300 blanks per minute at < 25 mm (length) 

≥ 250 blanks per minute at <50 mm (length) 

Length Tolerance 

≤ ±0.05 mm at blank length of 75 mm 

Speed (Capacity): 

≥ 200 blanks per minute at < 25 mm (length) 

≥ 175 blanks per minute at < 50 mm (length) 

Length Tolerance 

≤ ±0.05 mm at blank length of 50 mm 

Single Feed : 

Maximum 230 mm 

Length Adjustment: 

From operator panel 

Cut-off tools: 

1 pair of dies per cross-section and profile 

Grippers: 

1 set (2 pair of grippers) 

Inlet Guide: 

1 set per cross-section and profile 

Brakes: (bar feed only) 

1 set per cross-section and profile 

Time for tool change : 

2 – 10 minutes 

Panel with push-buttons for: 

• Number of blanks made 

• Order complete 

• Lack of material 

• Oil temp/pressure/level 

• Alarm indication 

Panel with push-buttons for: 

• Start-stop of the hydraulic pump
  

• Auto/man mode
  

• Emergency stop

Cutting unit: 

Width: 1 200 mm
Length: 2 100 mm
Height: 1 630 mm 

Centerline, cutoff: 

Height: 1 000 mm 

Hydropulsor HYP30-15 

Approx. 1 950 kg 

Voltage: 

3x400V, 50Hz 

Power requirements total: 

38 kW max 

Air-pressure: 

0.1 m3/min at pressure 6 bar 

Water cooler: 

30 l/min at pressure 3-4 bar 

Pressure: 

160 bar 

Power: 

33 kW max (intermittent duty) 

Flow rates: 

105 l/min 

Tank: 

Approx 250 l 

• Sound insulation 

• Air cooler instead of water cooler for hydraulics 

• Telephone modem for remote machine supervision 

• Measurement system
  - HYP3001: General measuring system for machine parameters.
  - HYP3002: Performance and supervision. 

• Bar magazine for diameter 3 – 40 mm 

• Roller straightener 

• Pay-off reel with or without power 

Integration of customer-delivered options by agreement. 

Anti-vibrators: 

Part of delivery (standard?) 

Colour, standard: 

Green and black 

(or customer order)