HYP30-25

WORKPIECE DIAMETER

Wire, bar or profile with equivalent cross-section: From 12 mm up to 25 mm.

CAPACITY AND LENGTH TOLERANCE

WIRE CUTTING: Equipped with sensor-positioned hydraulic feeder compatible with bar magazine

Speed (Capacity):

≥ 180 blanks per minute at < 50 mm (length)

≥ 160 blanks per minute at < 75 mm (length)
Length Tolerance ≤ ±0.05 mm at blank length of 50 mm

BAR CUTTING: Equipped with sensor-positioned hydraulic feeder compatible with bar magazine

Speed (Capacity):

≥ 160 blanks per minute at < 50 mm (length)

≥ 140 blanks per minute at < 75 mm (length)
Length Tolerance ≤ ±0.1 mm at blank length of 50 mm

STROKE AND FEEDER

Single Feed :

Maximum 400 mm
Length Adjustment: From operator panel

TOOLS

Cut-off tools:

1 pair of dies per cross-section and profile

Grippers:

 1 set (2 pair of grippers)

Inlet Guide:

 1 set per cross-section and profile
Brakes: (bar feed only) 1 set per cross-section and profile
Time for tool change : 2 – 10 minutes

OPERATOR PANEL (SIEMENS)

Panel with push-buttons for:

  • Start-stop of the hydraulic pump
  •  Auto/man mode

  •  

    Emergency stop

Control and supervision of:

  • Number of blanks made

  • Order complete

  • Lack of material

  • Oil temp/pressure/level

  • Alarm indication

DIMENSIONS

Cutting unit:

Width: 900 mm

Length: 1000 mm

Height: 2600 mm

Centerline, cutoff:

Height: 1000 mm

WEIGHT

Hydropulsor HYP30-25

Approx. 8000 kg

MAINS

Voltage:

3x400V, 50Hz

Power requirements total:

 48 kW max

Air-pressure:

 0.1 m3/min at pressure 6 bar

HYDRAULICS

Water cooler:

30 l/min at pressure 3-4 bar

Pressure:

 180 bar

Power:

 43 kW max (intermittent duty)

Flow rates:

 130 l/min

Tank:

 Approx 350 l

OPTIONS

  • Sound insulation

  • Air cooler instead of water cooler for hydraulics

  • Telephone modem for remote machine supervision

  • Measurement system- HYP3001: General measuring system for machine parameters.

    - HYP3002: Performance and supervision.

  • Bar magazine for diameter 3 – 40 mm

  • Roller straightener

  • Pay-off reel with or without power

Integration of customer-delivered options by agreement.

OTHER

Anti-vibrators:

Part of delivery (standard?)

Colour, standard:

 Green and black(or customer order)

* Specifications subject to change without notice.